UNITS

S-U-ELEKTRO-KULI-Mini

The compact unit for the dental lab, an electric wax knife as wall-socket version. To make working more pleasant and less tiring.

Technical Data

Item No. 10809

Height x Width x Depth (case only):
90 mm x 55 mm x 50 mm

Secondary voltage:
max. 6 V

Voltage1):
230 V, 50/60 Hz

Consumption:
ca. 8 W

Weight:
300 g

Temperature (of modeling instrument No. II):
max. 410°F (210°C)

1)110 –120 V version upon request.

S-U-ELEKTRO-KULI

The electric wax knife for all types of modelling, service-friendly equipment, fully insulated, automatic cut-out facility and integrated storage.

Technical Data

Item No. 10808

Height x Width x Depth:
55 mm x 85 mm x 170 mm

Secondary voltage:
max. 6 V

Voltage1):
230 V, 50/60 Hz

Consumption:
max. 9 W

Weight without accessories:
approx. 450 g

Temperature (at instrument No. II):
max. 410°F (210°C)

1)110 –120 V version upon request.

S-U-AURO-KULI

This combinated unit is usable for rapid gilding as well as an electric wax knife. Up-to-date high-tech electronic with simple and safe handling.

Technical Data

Item No. 13000

Height x Width x Depth:
65 mm x 112 mm x 200 mm

Voltage1):
230 V, 50/60 Hz

Consumption:
max. 15 W

Gilding current:
max. 200 mA

Heating capacity for instrument:
max. 3,75 W

Weight:
approx. 770 g

Permissible room temperature:
50-104°F (10-40°C)

1)110 –120 V version upon request.

S-U-WAX-WARMER

Water bath unit for the use in dental laboratories. Ideal for heating up of wax registrations and wax bite rims.

Technical Data

Item No. 10280

Height max.:
140 mm

External ∅:
140 mm

Voltage:
220-240 V, 50/60 Hz

Consumption:
100 W

Internal ∅:
85 mm

Usable Height Internal:
70 mm

Working temperature:
125°F (52°C)

Weight:
0,5 kg

S-U-SUPPORT “Universal”

The support for S-U-HANDPIECE is mounted on a collecting plate, which additionally features a device for detaching hot instruments.

Technical Data

Item No. 40112

Height x Width x Depth:
73 mm x 70 mm x 96 mm

Weight:
130 g

S-U-HANDPIECE

The lightweight handpiece for comfortable handling. Due to high-tech plastic, very low surface temperatures are guaranteed. Easy to clean.

Technical Data

Item No. 10394

S-U-PKT-ACCESSORY-INSTRUMENTS

Different attachment instruments for the modelling of wax for individual use, to put on the S-U-HANDPIECE.

Technical Data

Item No. S-U-PKT-ACCESSORY-INSTRUMENTS

S-U-WAX-KNIVES

Two differently sized exchangeable wax knifes for the common technique, which can be used on the S-U-HANDPIECE.

Technical Data

Item No. S-U-WAX-KNIVES

S-U-MODELLING-TIP

This modelling tip or rather probe allows the precise placement of wax and a life-like modellation, especially when reproducing mastication surfaces.

Technical Data

Item No. 30146

S-U-VIBRABABY

The small device for one flask. Two-step switch for the regulation of the vibration-intensity.

Technical Data

Item No. 15194

Width x Depth (table measurements):
120 mm x 120 mm

Height:
110 mm

Voltage1):
230 V, 50/60 Hz

Consumption:
max. 90 W

Intensity:
2 steps

Weight:
2,6 kg

S-U-VIBRAKID

Universal, powerful vibrator for two flasks. With constant vibration capacity, equally allotted on the entire surface.

Technical Data

Item No. 15195

Width x Depth (table measurements):
210 mm x 120 mm

Height:
115 mm

Voltage1):
230 V, 50/60 Hz

Consumption:
max. 120 W

Intensity:
2 steps

Weight:
4,5 kg

S-U-JUNIOR-CUT

Compact plaster trimmer with maintenance-free powerful motor, solid construction, for power-saving trimming. Ideal for small or practice laboratories.

Technical Data

Item No. S-U-JUNIOR-CUT

Height x Width x Depth:
320 mm x 305 mm x 430 mm

Voltage:
230 V, 50/60 Hz

Consumption:
550 W

Revolutions:
3000 min-1

Inlet tube ∅:
1/2” (13 x 3 mm)

Outlet tube ∅:
1” (32 mm)

Disc ∅:
250 mm

Weight:
13,5 kg

S-U-SUPER-CUT

Solid and extremely powerful plaster trimmer for highest demands in dental laboratories. High stability and long durability.

Technical Data

Item No. S-U-SUPER-CUT

Height x Width x Depth:
400 mm x 380 mm x 430 mm

Voltage:
230 V, 50/60 Hz

Consumption:
1100 W

Revolutions:
3000 min-1

Inlet tube ∅:
1/2” (13 x 3 mm)

Outlet tube ∅:
1” (34 mm)

Disc ∅:
300 mm

Weight:
20 kg

S-U-DOUBLE-CUT

Double plaster trimmer with extremely powerful motors, featuring two independent control switches. Available with foil or diamond discs coarse and fine.

Technical Data

Item No. S-U-DOUBLE-CUT

Height x Width x Depth:
420 mm x 530 mm x 500 mm

Voltage:
230 V, 50/60 Hz

Consumption:
2 x 1100 W

Revolutions:
3000 min-1

Model support:
255 cm2

Inlet tube ∅:
1/2” (13 x 3 mm)

Outlet tube ∅:
1 ¼” (40 mm)

Disc ∅:
300 mm

Weight:
48 kg

S-U-SUPER-CUT-ORTHO

Featuring a special model-table, this plaster trimmer is especially equipped for orthodontia.

Technical Data

Item No. S-U-SUPER-CUT-ORTHO

Height x Width x Depth:
400 mm x 380 mm x 430 mm

Voltage:
230 V, 50/60 Hz

Consumption:
1100 W

Revolutions:
3000 min-1

Inlet tube ∅:
1/2” (13 x 3 mm)

Outlet tube ∅:
1” (34 mm)

Disc ∅:
300 mm

Weight:
20 kg

S-U-ORTHO-CUT

Double plaster trimmer for orthodontia with a special model-table. Available with ceramic or diamond discs coarse and fine.

Technical Data

Item No. S-U-ORTHO-CUT

Height x Width x Depth:
420 mm x 530 mm x 500 mm

Voltage:
230 V, 50/60 Hz

Consumption:
2 x 1100 W

Revolutions:
3000 min-1

Model support:
255 cm2

Inlet tube ∅:
1/2” (13 x 3 mm)

Outlet tube ∅:
1 ¼” (40 mm)

Disc ∅:
300 mm

Weight:
48 kg

S-U-GRINDING-DISCS for S-U-JUNIOR-CUT and S-U-JUNIOR-CUT maximo

High-quality durable grinding discs for plaster trimmers from our in-house production.

Technical Data

Item No. S-U-GRINDING-DISCS for S-U-JUNIOR-CUT

S-U-GRINDING-DISCS for S-U-SUPER-CUT and S-U-SUPER-CUT-ORTHO

High-quality durable grinding discs for plaster trimmers from our in-house production.

Technical Data

Item No. S-U-SCHLEIFSCHEIBEN for S-U-SUPER-CUT

S-U-GRINDING-DISCS for S-U-DOUBLE-CUT and S-U-ORTHO-CUT

High-quality durable grinding discs for plaster trimmers from our in-house production.

Technical Data

Item No. S-U-GRINDING-DISCS for S-U-DOUBLE-CUT and S-U-ORTHO-CUT

S-U-RUBBER-POLISHING-TROUGH

Convince yourself of our proven polishing trough manufactured from solid rubber. For polishing and suction work.

Technical Data

Item No. 10745

Height x Width x Depth:
250 mm x 250 mm x 320 mm

Connection outlet without synthetic reduction

Connection outlet external ∅:
73 mm

Connection outlet internal ∅:
51 mm

Weight:
5,5 kg

Delivery:
without synthetic insertion tray

Synthetic Insertion Tray

Synthetic Insertion Tray for S-U-RUBBER-POLISHING-TROUGH.

Technical Data

Item No. 9710744501

Synthetic Reduction for 40 mm-∅ suction tube

Synthetic Reduction for 40 mm-∅ suction tube for S-U-RUBBER-POLISHING-TROUGH.

Technical Data

Item No. 9710743501

S-U-POLISHING-SPINDLE

Hard-chrome plated polishing spindles with extremely resistant thread. For the left or right side of the polishing motor, as long or short version.

Technical Data

Item No. S-U-POLISHING-SPINDLE

S-U-AQUEX

Our practical heating-unit for drying and preheating of up to six duplicate models.

Technical Data

Item No. 11250

Height x Width x Depth (depth incl. air tube):
220 mm x 450 mm x 420 mm

Voltage:
230 V, 50/60 Hz

Consumption:
1500 W

Heating time to 290°C (1076°F):
approx. 10 min

Capacity:
6 duplicate models

Weight:
5 kg

UNITS

Filter products