Waxes

CROWN AND BRIDGE TECHNIQUES

Our extensive choice of dental waxes has
been put up to meet the requirements of den- tal technology. Spot checks and final product- in- spection, as well as the use of especially selected raw materials ensure the high quality of our dental waxes. We are able to supply
special packings or any type of wax, on re- quest.
All cone-shaped S-U-waxes can be attached to
one another, to form an individual set. Each cone
is protected from contamination by a transparent cap. Nearly all wax cones can be supplied in 500 g economy bars at a favourable price.

S-U-MODELLING WAX, blue
	Especially suitable for the waxing of occlusal sur- faces and the shaping of crown walls as well as the building up of bridge pontics for acrylic and porce- lain veneers. It distinguishes by its high surface density. The opaque, strong co- louring makes it easier to deter mine the contures while modelling.
Item No. 60 000 01 Cone 45 g Item No. 60 000 01 1 Bar 500 g Solidus 147°F (64°C) Price in €: 11,00 ( 1 Cone 45 g) Price in €: 79,40 (1Bar 500 g)

S-U-MODELLING WAX, green
	A smoother, medium-hard quality of our approved S-U-MODELLING WAX, blue (hard) for the casting technique featuring the same excellent physical treatment properties. Due to its minor hardness this wax presents improved breakage stability and thus may be used for all the pro- cedures of the casting- technique.
Item No. 60 000 11 Cone 45 g Item No. 60 000 11 1 Bar 500 g Solidus 135°F (57°C) Price in €: 11,00 ( 1 Cone 45 g) Price in €: 79,40 (1Bar 500 g)

S-U-TRANSPA WAX, grey, medium-hard
	base for S-U-INLAY WAX GREY A totally new C+B casting wax with excellent physical properties, due to its especially high-quality raw materials. >excellent fluidity; does not lift off; contracts to the moistened sur- face; especially suitable as un- derlay wax for inlays or for crown borders >organic coloration, therefore it burns totally without leaving any residues >translucent when liquid, there- fore, eventual bubbles or conta- minations are well visible while modelling preparation. Limits and solidifying phase are well perceptible >color grey, for lowest possible physiological strain on the eyes
Item No. 60 029 01 Cone 45 g Solidus 138°F (59°C) Price in €: 13,10 ( 1 Cone 45 g)

S-U-INLAY WAX, grey, hard
	For chewing surface design. Physical features are similar to those of S-U-ESTHETIC WAX. Burns without leaving any resi- dues, therefore suitable for glass ceramics.
Item No. 60 028 01 Cone 45 g Solidus 142°F (61°C) Price in €: 13,10 ( 1 Cone 45 g)

S-U-UNDERLAY WAX
	S-U-UNDERLAY WAX is to be used especially for the forming of cervical borders of crowns, onlays and inlays. It is a soft casting wax, which shows almost no con- traction. Applied to cer- vical bor- ders of crowns after waxing it guarantees precise border seals.
Item No. 60 040 01 Cone 45 g Solidus 150°F (66°C) Price in €: 11,00 ( 1 Cone 45 g)

S-U-SECONDARY WAX was es- pecially developed for the produc-
tion of secondary pats for tele-
scope crowns, precision attach-
ments and individual attachments.
It has the unique characteristic of remaining stuck to the metal during solidification, which is due to the exact harmonization of temperature and hardness of the wax. No streaking during further wax-applications.

S-U-SECONDARY WAX

Cone 45 g Bar 500 g Solidus
S. Item no. 60 010 01 60 010 01 1 143°F (62° C)
W.Item no. 60 015 01 60 015 01 1 138°F (59° C)

Price in €: 13,10 ( 1 Cone 45 g)
Price in €: 79,40 (1Bar 500 g)

S-U-INLAY WAX

S-U-INLAY WAX is the ideal wax for
the modelling of inlays, onlays and three quarter crowns. Its special characteristic is that it does not withdraw, i.e. lift off the edges while solidifying.The somewhat smoother winter quality distinguishes by exce-llent flowing and carving properties.

Cone 45 g Bar 500 g Solidus
S. Item no. 60 020 01 60 020 01 1 135°F (57° C)
W.Item no. 60 025 01 60 025 01 1 131°F (55° C)

Price in €: 13,10 ( 1 Cone 45 g)
Price in €: 79,40 (1Bar 500 g)

S-U-MILLING WAX, red hard

This wax is a harder version of
the S-U-MODELLING WAX and
thus presents the same rigidity
and surface density. Its special
composition suggests its use
with rotating instruments and
electrically heated instruments
for the building up of primary sec-
tions of telescopic crowns.

tem No. 60 030 01 Cone 45 g
Solidus 145°F (63°C)
Price in €: 13,10 ( 1 Cone 45 g

S-U-MILLING WAX, blue, extra hard

As its name suggests, this is an
especially hard version although,
unlike the S-U MILLING WAX
red, hard, manufactured accor-
ding to a new recipe. It is organ-
ically coloured and has a high
synthetic content, enabling ho-
mogeneous application. Its ex-
treme surface density makes for
excellent splinter removal when
working with rotating instruments.

Item No. 60 033 01 Cone 45 g
Solidus 145°F (63°C)
Price in €: 13,10 ( 1 Cone 45 g

S-U-STICKY WAX C+B

particularly suitable for the con-
nection of objects before solder-
ing.Its brittleness when cool pre-
vents the change of po- sition
(distortion) of individual parts.

tem No. 60 045 01 Cone 45 g
Solidus 170°F (67°C)
Price in €: 11,00 ( 1 Cone 45 g)

S-U-CAVIPLANE WAX

For the use of quick blocking out
of cavities in plaster dies. Its high
melting temperature of about
250°F (120°C) makes it possible,
after the usual die lubrication, to
add modelling wax or to make a
cap with the dipping or adapting
method without involving the cor-
responding wax.

Item No. 60 035 01 Cone 45 g
Solidus 185°F (85°C)
Price in €: 11,00 ( 1 Cone 45 g)